The five claw buckle consists of four parts, two of which are small circles with claws that are fixed by the bite of the five claws on the other side. Due to the short claws of the five claw buckle, it is not suitable for too thick positions. Generally, the five claw buckle can be used as a fastener for summer or children's clothing or thin small bags.
One part of the five claw buckle is difficult to distinguish between the front and back sides, and it cannot be seen at first glance. Upon closer inspection, the inner edge of the front side is relatively flat, while the back side has a groove, which requires the groove to bite with the claw in order to be fixed. Be sure to pay attention to this before installation.
The installation tool for the five claw buckle can be much simplified. Firstly, it does not require a punching punch, and the sharp claws can be directly threaded from the front to the back: the tool used can be universal with the four in one buckle, only the one with a concave hole for tapping can be used. After placing the other half on the paw, using the same tool, two parts can be tapped for fixation
